PEC-CDGC Hosts 16th Open House 2025 with Great Enthusiasm, Students Explore Innovation and Engineering

Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025
Open House 2025

The Career Development and Guidance Centre (CDGC), at Punjab Engineering College (Deemed to be University), Chandigarh successfully organized the annual flagship event OPEN HOUSE 2025, on 24th April, 2025. Since its inception in 2010, this event serves as a vibrant platform to inspire and guide young minds from across the tricity.

The inaugural ceremony was graced by Sh. Rubinderjit Singh Brar (PCS), the Director Higher Education, Chandigarh Administration, also an alumni of PEC (Batch 1992, Civil) along with esteemed Director of PEC, Prof. Rajesh Kumar Bhatia, Prof. JD Sharma (Head, CDGC), and all the Deans, Heads, staff and 300 students approximately from various schools of the tricity.

This 16th OPEN HOUSE-2025 invited school students from tricity to experience the dynamic world of engineering and innovation through an immersive, guided campus tour. Students got a chance to explore the cutting-edge laboratories, advanced research centers, and state-of-the-art facilities across all departments of PEC.

Prof. JD Sharma (Head, CDGC), delivered the introductory remarks and cordially welcomed the visiting schools, and the dignitaries present in the inaugural ceremony. In his address he also expounded on the institution's initiative and the expected outcomes of the 16th Open House 2025. He also provided an overview of the working and activities of the CDGC. A video showcasing the achievement, activities and opportunities of PEC was also shown.

Further, Director Rajesh Kumar Bhatia, provided insights on the importance of this event. He also encouraged all the school students to make the best out of this opportunities. He asked them to keenly observed all the research and laboratories facilities of PEC.

Chief Guest Sh. Rubinderjit Brar shared his nostalgic feeling of being back at his own alma mater. He shed light on the various initiatives taken by back to encourage the research minds. He did his B.Tech (1988-92) and M.Tech (1992-94) from here. He said that he had become energetic after seeing a curiosity and passion in the eyes of these young students. He encouraged them to interact with students, faculty, and must enquire about the technology and research from them. He also remarked that, In life, you must take decisions, you must experiment in life and your dreams are valid, your potential is limitless and your future starts now.

The event also featured detailed presentations by faculty members: Prof. R.S. Walia, Head, Workshop and Skill Development Centre (Centre of Excellence in Siemens), shared an insightful overview of PEC’s modern laboratories and the Production & Industrial Engineering Department. Prof. Arun Kumar Singh, Head, Department of Electronics and Communication Engineering, offered an engaging presentation on the Semiconductor Research Centre (SRC), captivating students with cutting-edge developments in the field.

One of the key highlights of the event was the project showcase—where innovative and interdisciplinary projects developed by PEC students are presented to the visiting students. These projects offered a glimpse into the practical application of engineering knowledge and the problem-solving mindset nurtured at PEC.

Whether it’s exploring robotics, AI, sustainable energy solutions, or structural design, OPEN HOUSE 2025 sparked curiosity, provided career guidance, and fostered early exposure to the vast world of science and technology.

Recent Research Activities

Sn coated Fe3O4 nanoparticles for selective and efficient oxidation of anthracene to anthraquinone
Harminder Kaur
Flattening of free energy profile and enhancement of energy storage efficiency near morphotropic phase boundary in lead-free BZT-xBCT
Sanjeev Kumar
Influence of Flat Friction Stir Spot Welding Process Parameters on Quality Characteristics of AA6082Weld
Dr. Rajat Upadhyaya
Multispectral transmission through phoxonic crystal slot-waveguide at midwave infrared frequencies
Jyoti Kedia, Neena Gupta
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Modelling of barriers encumbering the advancement of processing technologies towards lean manufacturing principles.
Mohit Tyagi
Analyzing the thermal, economic, and environmental dynamics of phase change materials used in cold chain applications.
Mohit Tyagi
Bilayer Graphene/HgCdTe Heterojunction Based Novel GBn Infrared Detectors
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
BRIEFBCS: binary robust independent elementary features based fuzzy vault scheme in BCS
Nitin Kumar
Fluorine-containing 2,3-diaryl quinolines as potent inhibitors of methicillin and vancomycin-resistant Staphylococcus aureus: Synthesis, antibacterial activity and molecular docking studies
Harminder Kaur
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
Ballistic Rectifier for Thermoelectric and Terahertz Applications
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Changes in condylar position after orthognathic surgery and its correlation with temporomandibular symptoms (TMD)- a prospective study
Prof. Parveen Kalra
Time-dependent mechanistic insight into photo-degradation of mixed hydrophobic disperse dyes by magnetically separable nitrogen iron codoped titania under visible light using process variable optimization
Vasundhara Singh
4-Hydroxy Enigmol, a 1-Deoxyphytosphingolipid that Exhibit Good Activity against Prostate and Colon Cancer
Vasundhara Singh
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Assessing the Role of Virtual Surgical Planning in Mandibular Reconstruction With Free Fibula Osteocutaneous Graft
Prof. Parveen Kalra
GaN HEMTs FOR HIGH FREQUENCY APPLICATIONS
Arun Kumar Singh, Sanjeev Kumar
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Simulation of efficient Sn/Pb-based formamidinium perovskite solar cells with variation of electron transport layers
Shilpi Chaudhary
Modelling of barriers encumbering the advancement of processing technologies towards lean manufacturing principles.
Mohit Tyagi
Geospatial survey of sand mines pilot project in Haryana
Dr. Har Amrit Singh Sandhu
Modulation of polar dynamics with oxygen vacancies in Zn doped BaZr0.1Ti0.9O3
Sanjeev Kumar
An auto-tuned droop coefficient-based controller for microgrid system to enhance grid resilience during blackouts
Ajay Kumar
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar
Critical Behavior of Relaxor〖 Pb〗_0.91 La_0.09 (Zr_0.65 Ti_0.35 ) O_3: Interplay between Polar Nano Regions, Electrocaloric and Energy Storage Response
Sanjeev Kumar
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
Novel Vanillin-based hybrids inhibit quorum sensing and silences phenotypical expressions in Pseudomonas aeruginosa
Vasundhara Singh
Single sample face recognition using deep learning: a survey
Nitin Kumar
Health Risk Assessment of Gurdaspur, Punjab, India Using Field Experiments and GIS: A Groundwater Perspective
Dr. Har Amrit Singh Sandhu
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
3D Printable, injectable Amyloid-based composite Hydrogel of Bovine Serum Albumin-Aloe Vera for Rapid Diabetic Wound Healing
Shilpi Chaudhary
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Structural, morphological, and opto-electrical properties of Y2-xYbxO3 nanoparticles synthesized using co-precipitation method
Dr. Jagmohan Datt Sharma
Improved Pd/Ru metal supported graphene oxide nano-catalysts for hydrodeoxygenation (HDO) of vanillyl alcohol, vanillin and lignin
Vasundhara Singh
Synthesis, structural elucidation, and catalytic activity of bimetallic rhenium-tin complexes containing Schiff base ligand
Harminder Kaur
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
Visualization and analysis of key performance indicators for agricultural cold supply chain in Indian context using fuzzy DEMATEL approach.
Mohit Tyagi
Electrochemical Behavior of Aluminum-Molybdenum Surface Composites Developed by Friction Stir Processing
Dr. Mahesh V. P.
Thiophenol amine-based Schiff base for colorimetric detection of Cu2+ and Hg2+ ions
Harminder Kaur
Investigations of effect of hydroxyl-terminated polybutadiene-based polyurethane binders containing various curatives on thermal decomposition behaviour and kinetics of energetic composites
Vasundhara Singh
Stubble burn area estimation and its impact on ambient air quality of Patiala & Ludhiana district, Punjab, India
Dr. Har Amrit Singh Sandhu
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
Acidic ionic liquids: an alternative to HF for {001} reactive facet-controlled synthesis of anatase titania
Vasundhara Singh
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
Self-Switching Device (SSD) as Terahertz/Microwave detector
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Depression status identification using autoencoder neural network
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
A comprehensive review of grid-connected solar photovoltaic system: Architecture, control, and ancillary services
Ajay Kumar
Self-biased characteristics of NZCF/BCZT layered magnetoelectric composites: A novel coupling paradigm in magnetoelectricity
Sanjeev Kumar
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
Analyzing the thermal, economic, and environmental dynamics of phase change materials used in cold chain applications.
Mohit Tyagi
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
SIFTBCS: scale invariant feature transform based fuzzy vault scheme in biometric cryptosystem
Nitin Kumar
Mathematical depiction of costing perspectives allied with the dynamics of processed food supply chain
Mohit Tyagi
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
Effect of polar nano region dynamics on pyroelectric energy conversion efficiency of doped BaTiO3
Sanjeev Kumar
Chemical engineering at morphotropic phase boundary: Interplay with thermally stabilized ultra-high energy storage and electrocaloric response
Sanjeev Kumar
Exotic role of poling protocol on augmentation of magnetoelectricity in BCZT/CNZF layered composites
Sanjeev Kumar
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
Computational investigation of bioactive 2,3-diaryl quinolines using DFT method: FT- IR, NMR spectra, NBO, NLO, HOMO-LUMO transitions, and quantum-chemical properties
Harminder Kaur
Tribological behaviour of transparent ceramics: A review
Dr. Sandan Kumar Sharma
Sustainable magnetically recoverable Iridium coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water
Harminder Kaur
Evaluation of corrosion resistance, mechanical integrity loss and biocompatibility of PCL/HA/TiO2 hybrid coated biodegradable ZM21 Mg alloy
Dr. Uma Batra
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Visualization and analysis of key performance indicators for agricultural cold supply chain in Indian context using fuzzy DEMATEL approach.
Mohit Tyagi
Metamaterial Absorbers for Microwave/THz applications
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
Assessing the Role of Virtual Surgical Planning in Mandibular Reconstruction With Free Fibula Osteocutaneous Graft
Prof. Parveen Kalra
Surface Displacement Analysis of Road-Cut Slopes in the Vicinity of Koteshwar Area, Uttarakhand, India
Dr. Har Amrit Singh Sandhu
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Visualization and Assessment of Energy Efficiency Drivers and Solution Practices for Temperature-controlled Supply Chain Operations.
Mohit Tyagi
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
RF MEMS SWITCH FOR HIGH FREQUENCY APPLICATION
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Depression status identification using autoencoder neural network
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
Synthesis and Characterization of CoCrFeNi1.75-xTi0.25+x High Entropy Alloy
Suresh Chand
To Study Impact of Array Tilt Angle, Orientation, and Inverter arrangement on Power Output of Rooftop Solar PV Panels for Chandigarh.
Prof. Tarlochan Kaur (PI) , Dr. Poonam Saini (CO-PI)
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
Mathematical depiction of costing perspectives allied with the dynamics of processed food supply chain
Mohit Tyagi
Characterization and Quasi-Static Compressive Response Of Closed Cell Al2024-B4Cp Composite Foams and Their Energy Absorption Characteristics
Dr. Jagmohan Datt Sharma
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar
Evaluation of school backpack prototype-based on gait parameters, energy expenditure and posture of students
Prof. Parveen Kalra
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
Multispectral transmission through phoxonic crystal slot-waveguide at midwave infrared frequencies
Jyoti Kedia, Neena Gupta
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt
Suresh Chand
Adaptive qXE-LMF Filter for Improving Power Quality Using Grid Supporting Photovoltaic System
Dr. Ajay Kumar
Correlation between the Mechanical and Tribological Properties of Rutile Reinforced LM27 Alloy Composite
Dr. Jagmohan Datt Sharma
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Changes in condylar position after orthognathic surgery and its correlation with temporomandibular symptoms (TMD)- a prospective study
Prof. Parveen Kalra
Recognition of Bovine Hemoglobin Protein on Molecularly Imprinted Polymer Surfaces using Nonlinear Vibrational Spectroscopy
Shilpi Chaudhary