Expert Lecture on Introduction to Fog Computing by Dr. Nitin Auluck

Expert-Lecture-on-Introduction-to-Fog-Computing-by-Dr.-Nitin-Auluck-image-index-0
Expert-Lecture-on-Introduction-to-Fog-Computing-by-Dr.-Nitin-Auluck-image-index-1

An Expert Lecture on "Introduction to Fog Computing" was held on 28th June, 2019. The lecture has been organized by the Computer Centre as a part of the ongoing Six Weeks Workshop on Web Development and Introduction to Programming the Internet of Things (IoT) in association with Chandigarh Subsection of IEEE to provide the students with an opportunity to get an introduction to the world of Fog Computing. The guest lecture began with a welcome address by Sh. Prabhsimran Singh Bindra, Co-Coordinator for the workshop. He also introduced Dr. Sanjay Batish, Coordinator of the workshop and fellow Co-Coordinators namely Sh. Sushil Kumar and Sh. Sandeep Pathak. He then welcomed Dr.Nitin Auluck, Assistant Professor, Department of Computer Science and Engineering, IIT Ropar, resource person to deliver the lecture.

Dr. Nitin Auluck did his Ph.D from University of Cincinnati, USA and has Fog Computing, Scheduling and Resource Allocation, Parallel and Distributed Computing as his research areas. The session was then continued by Dr. Nitin who began with an introduction to what Fog Computing is and how important Cloud Computing is going to be in the near future. Following which, he explained the issues faced by Traffic Management Systems and what are the various solutions to these issues. His lecture took the participants on a journey starting from the basics of Cloud Computing to IoT based solutions to control various day to day issues.

The session ended with a hearty thanks to Dr. Nitin Auluck in appreciation for taking the time out to educate the students on Internet of Things. Dr. Nitin Auluck thanked the Coordinator, Dr. Sanjay Batish and his team for providing the platform to organize Expert Lectures on such innovative technologies. He appreciated faculty members, students and other participants for the successful conduction of the lecture.

Recent Research Activities

Studies on behaviour of micropiles under oblique pullout loading
Dr S.K Singh
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Structural, morphological, and opto-electrical properties of Y2-xYbxO3 nanoparticles synthesized using co-precipitation method
Dr. Jagmohan Datt Sharma
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
Health Risk Assessment of Gurdaspur, Punjab, India Using Field Experiments and GIS: A Groundwater Perspective
Dr. Har Amrit Singh Sandhu
Software Defined Networks (Cloud NAS, CCN, IoT, NFV), Advanced IoT (CPS), Vehicular Ad-hoc Networks (ITS), Mobile Communication, Network Security
Dr. Sandeep Harit
Evaluation of corrosion resistance, mechanical integrity loss and biocompatibility of PCL/HA/TiO2 hybrid coated biodegradable ZM21 Mg alloy
Dr. Uma Batra
Characterization and Quasi-Static Compressive Response Of Closed Cell Al2024-B4Cp Composite Foams and Their Energy Absorption Characteristics
Dr. Jagmohan Datt Sharma
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
Influence of Flat Friction Stir Spot Welding Process Parameters on Quality Characteristics of AA6082Weld
Dr. Rajat Upadhyaya
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Electrochemical Behavior of Aluminum-Molybdenum Surface Composites Developed by Friction Stir Processing
Dr. Mahesh V. P.
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Correlation between the Mechanical and Tribological Properties of Rutile Reinforced LM27 Alloy Composite
Dr. Jagmohan Datt Sharma
To Study Impact of Array Tilt Angle, Orientation, and Inverter arrangement on Power Output of Rooftop Solar PV Panels for Chandigarh.
Prof. Tarlochan Kaur (PI) , Dr. Poonam Saini (CO-PI)
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
Tribological behaviour of transparent ceramics: A review
Dr. Sandan Kumar Sharma
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
Geospatial survey of sand mines pilot project in Haryana
Dr. Har Amrit Singh Sandhu
Surface Displacement Analysis of Road-Cut Slopes in the Vicinity of Koteshwar Area, Uttarakhand, India
Dr. Har Amrit Singh Sandhu
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
Adaptive qXE-LMF Filter for Improving Power Quality Using Grid Supporting Photovoltaic System
Dr. Ajay Kumar
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Studies on behaviour of micropiles under oblique pullout loading
Dr S.K Singh
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar
High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt
Suresh Chand
Stubble burn area estimation and its impact on ambient air quality of Patiala & Ludhiana district, Punjab, India
Dr. Har Amrit Singh Sandhu
Synthesis and Characterization of CoCrFeNi1.75-xTi0.25+x High Entropy Alloy
Suresh Chand
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar