Sushant Samir |
Mechanical Engineering |
"A review study on the active methods of heat transfer enhancement in heat exchangers using electroactive and magnetic materials." Materials Today: Proceedings (2021). Thapa, Sashank, Sushant Samir, Khushmeet Kumar, and Sushma Singh.
|
|
|
|
|
Kamal Kumar |
Mechanical Engineering |
“Apatite formation and weight loss study in EDMed perforated AZ31 Mg-Alloy”, Journal of Magnesium and Alloys, Vol. 5, No. 3, pp. 362-367, 2017, SCI, IF-17.6, doi.org/10.1016/j.jma.2017.08.008 |
Peer Reviewed |
2017 |
One of the Two Author/ First and Principal/ Corresponding Author |
Above 10 |
Kamal Kumar |
Mechanical Engineering |
“Mechanical characteristics and bioactivity of porous Ni50-xTi50Cux (x=0,5 and 10) prepared by p/m”, Material Science and Technology, Vol. 34, No. 8, pp. 934-944, 2017. Authors: Sharma, N. and Kumar, K., IF-1.920 |
|
|
|
|
Kamal Kumar |
Mechanical Engineering |
“Parameter optimization and experimental study on wire electrical discharge machining of porous Ni40Ti60 alloy”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 231, No. 6, pp. 956-970, 2017 Authors: Sharma, N., Tilak, R. and Kumar, K., IF-1.111 |
|
|
|
|
Kamal Kumar |
Mechanical Engineering |
“WEDM of nickel based aerospace alloy: Optimization of process parameters and modelling”, International Journal on Interactive Design and Manufacturing (IJIDM), Vol. 11, No. 4, pp. 917-929, 2017, Authors: Kumar, K. , Kumar, V. and Sharma, N., IF-2.68 |
|
|
|
|
Kamal Kumar |
Mechanical Engineering |
“Surface modification of WC-CO alloy using Al AND Si powder through WEDM”, Particulate science and technology, an international journal, Vol. 36, No. 7, pp. 878-886, 2017 Authors: Sharma, N. and Kumar, K., IF-2.356 |
|
|
|
|
Tejbir Kaur |
Mechanical Engineering |
“Vibration Analysis for Failure Detection of Bearing and Gear Assembly” Recent Trends in Engineering Design, pp 41-51, . Springer, Singapore, 2021. Authors- Kaur Tejbir, Gagandeep
|
|
|
|
|
Kamal Kumar |
Mechanical Engineering |
Challenges and opportunities for biodegradable magnesium alloy implants, Materials Technology, Vol. 33, No. 2, pp. 153-172, 2017. SCI, IF-3.846, doi.org/10.1080/10667857.2017.1377973 |
Peer Reviewed |
2018 |
One of the Two Author/ First and Principal/ Corresponding Author |
Between 2 and 5 |
Kamal Kumar |
Mechanical Engineering |
“Post-processing of NiTi alloys: issues and challenges”, Powder metallurgy and metal ceramics, Vol. 56, No. 9-10, pp. 599-609, 2017. Authors: Sharma, N., Kumar, K. and Kumar, V., SCI indexed |
|
|
Other/Joint Author |
|
Kamal Kumar |
Mechanical Engineering |
“Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy”, Particulate Science and Technology, an international journal, Vol. 35, No. 5, pp. 541-546, 2017. Authors: Sharma, N. , Raj, T. and Kumar, K., SCI indxed |
|
|
|
|