Sr. No. | Image of Equipment | Name of the Equipment | Brief Description (key feature) of each Equipment | Name of Faculty In-charge of the equipment | Location | Purchased from Institute fund/ Project grant/ others | Status of Equipment (Working/Not Working) |
---|---|---|---|---|---|---|---|
181 | Refrigeration Test Rig | Refrigeration Test Rig | The Refrigeration Test Rig unit is required to conduct experiments and demonstrate the process of cooling of water. The setup consists of a Compressor, Condenser, Evaporator. A suitable water tank with heating arrangement is provided. Temperature at various points is measured with the help of RTD sensors. | Prof. Ankit Yadav | Refrigeration and Air – Conditioning Lab | Institute Fund | Working |
182 | Window AC Test Rig | Window AC Test Rig | The Window Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system. | Prof. Ankit Yadav | Refrigeration and Air – Conditioning Lab | Institute Fund | Working |
183 | Hot / Cold Circulating Cosntant Temperature Bath | Hot / Cold Circulating Cosntant Temperature Bath | Circulating baths are constant temperature water baths that enable rapid heating and cooling of samples by constantly circulating water. Efficient temperature maintenance can be performed over a wide range of temperatures. | Prof. Ankit Yadav | Refrigeration and Air – Conditioning Lab | Institute Fund | Working |
184 | Thermal Energy Storage Test Rig | Thermal Energy Storage Test Rig | This is basically required for thermodynamic analysis of phase change materials along with assessment of energy storage capacities of same. | Prof. Ankit Yadav | Refrigeration and Air – Conditioning Lab | Institute Fund | Working |
185 | Universal Testing Machine | Universal Testing Machine | A universal testing machine is used to test the tensile stress and compressive strength of materials. Universal testing machines (UTMs) that test mechanical properties such as tensile, flexural, compressive and shear. The UTM is a great multi-purpose instrument for an R&D lab. or quality control department. | Prof. Kamal Kumar | Strength of Material Lab | Institute Fund | Working |
186 | Manual Universal Testing Machine | Manual Universal Testing Machine | A universal testing machine is used to test the tensile stress and compressive strength of materials. Universal testing machines (UTMs) that test mechanical properties such as tensile, flexural, compressive and shear. The UTM is a great multi-purpose instrument for an R&D lab. or quality control department. | Prof. Kamal Kumar |
Strength of Material Lab | Institute Fund | Working |
187 | Impact Testing Machine | Impact Testing Machine | An impact testing machine is used to determine the resistance of a material or component to a rapid load under varying temperature conditions. | Prof. Kamal Kumar | Strength of Material Lab | Institute Fund | Working |
188 | Column Testing Machine | Column Testing Machine | These machines are designed for testing various materials like rubber, plastics, cables, leather, paper, plywood and metals. Tension, compression, bend and flexural tests can be performed on these machines with suitable grips and fixtures. | Prof. Kamal Kumar | Strength of Material Lab | Institute Fund | Working |
189 | Helical Spring Testing Machine | Helical Spring Testing Machine | Special testing machines for dealing with tension and Compression Springs of helical pattern are to be made use of the Spring Testing Machine. The Spring Testing Machine is designed to statically tests on springs which cannot be otherwise used for Compression and Tensile tests. | Prof. Kamal Kumar | Strength of Material Lab | Institute Fund | Working |
190 | Torsion Testing Machine | Torsion Testing Machine | Testing machines for torsion testing are mainly used in science, research and teaching, in testing laboratories and in production control during production. They are used to determine the torque load of specimens made of different materials in static tests, e.g: Plastics, composite materials. Screws, cardan shafts. | Prof. Kamal Kumar | Strength of Material Lab | Institute Fund | Working |