Research Facilities

Sr. No.	Image of Equipment	Name of the Equipment	Brief Description (key feature) of each Equipment	Name of Faculty In-charge of the equipment	Location	Purchased from Institute fund/ Project grant/ others	Status of Equipment (Working/Not Working)
171	Pin Fin Control System	Pin Fin Control System	This setup is designed to study the heat transfer in a pin fin. It consists of cylindrical fin fitted to the base in rectangular duct. A blower is provided on one side of duct to conduct experiments under forced convection heat transfer mode.	Prof. S K Soni	Heat Transfer Lab	Institute Fund	Working
172	Pool Boiling Control System	Pool Boiling Control System	Pool boiling is of interest in heat transfer applications because of its potential for removing large amount of heat resulting from the latent heat of evaporation and little pressure drop penalty for circulating coolant through the system.	Prof. S K Soni	Heat Transfer Lab	Institute Fund	Working
173	Vortex Tube Control Panel	Vortex Tube Control Panel	Vortex Tubes are used when other cooling tools are not able to cool an area or an enclosure to the desired temperature. Vortex tube operated panel coolers are mounted on the top of electrical and electronic cabinets to send clean, cool air down into the panel, displacing hot air around sensitive electronics.	Prof. S K Soni	Heat Transfer Lab	Institute Fund	Working
174	Electro – Dynamic Vibration Shaker	Electro – Dynamic Vibration Shaker	Electrodynamic LDS (Ling Dynamic Systems) Shakers delivering a force rating supporting a wide range of payloads. The LDS Shakers are well-suited for vibration testing products and structures from small components and hardware to very large devices and structures, such as satellite systems or airplane parts.	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
175	Abrasive Flow Machine / Hydraulic Press	Abrasive Flow Machine / Hydraulic Press	AFM smooths and finishes rough surfaces, and is specifically used to remove burrs, polish surfaces, form radii, and even remove material. The nature of AFM makes it ideal for interior surfaces, slots, holes, cavities, and other areas that may be difficult to reach with other polishing or grinding processes.	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
176	Electro – Chemical Discharge Machining	Electro – Chemical Discharge Machining	Electrochemical discharge machining (ECDM) is one of the widely accepted hybrid non-conventional micro machining techniques, which is used to fabricate miniaturized products on electrically conductive and non-conductive materials	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
177	Electric Furnace	Electric Furnace	Electric furnace is used for heating purpose in various industrial production processes. Electric furnaces are used where more accurate temperature control is required.	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
178	Turning Force Dynamometer	Turning Force Dynamometer	Turning Force Dynamometer can measure three perpendicular cutting force components simultaneously during turning and the measured numerical values can be stored in computer by data acquisition system. This dynamometer was designed to measure up to 3500 N maximum force and the sensitivity of system is ±5 N.	S K Mangal , A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
179	Surface Roughness Machine	Surface Roughness Machine	A roughness tester is used to quickly and accurately determine the surface texture or surface roughness of a material. A roughness tester shows the measured roughness depth (Rz) as well as the mean roughness value (Ra) in micrometers or microns (µm).	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working
180	Tool Maker Microscope	Tool Maker Microscope	Tool Maker’s microscopes are multipurpose measuring devices that are generally used for the examination and measurement of small mechanical and electrical parts or tools. These microscopes are used to view and measure linear distances, thread pitch, thread angles, tool edges, tool wear surfaces etc. and are ideal for photo-lithographic labs, nano-technology labs, and biomedical labs.	S K Mangal, A Manna	Vibration cum Manufacturing Lab	Institute Fund	Working