Annual Accreditation Information: Publications
Displaying 1831 - 1840 of 2562 Publications
| Faculty Name | Department | Title | Publication Type | Year | Authorship | Impact Factor |
|---|---|---|---|---|---|---|
| Kamal Kumar | Mechanical Engineering | “WEDM of nickel based aerospace alloy: Optimization of process parameters and modelling”, International Journal on Interactive Design and Manufacturing (IJIDM), Vol. 11, No. 4, pp. 917-929, 2017, Authors: Kumar, K. , Kumar, V. and Sharma, N., IF-2.68 | ||||
| Kamal Kumar | Mechanical Engineering | “Surface modification of WC-CO alloy using Al AND Si powder through WEDM”, Particulate science and technology, an international journal, Vol. 36, No. 7, pp. 878-886, 2017 Authors: Sharma, N. and Kumar, K., IF-2.356 | ||||
| Tejbir Kaur | Mechanical Engineering | “Vibration Analysis for Failure Detection of Bearing and Gear Assembly” Recent Trends in Engineering Design, pp 41-51, . Springer, Singapore, 2021. Authors- Kaur Tejbir, Gagandeep |
||||
| Kamal Kumar | Mechanical Engineering | Challenges and opportunities for biodegradable magnesium alloy implants, Materials Technology, Vol. 33, No. 2, pp. 153-172, 2017. SCI, IF-3.846, doi.org/10.1080/10667857.2017.1377973 | Peer Reviewed | 2018 | One of the Two Author/ First and Principal/ Corresponding Author | Between 2 and 5 |
| Kamal Kumar | Mechanical Engineering | “Post-processing of NiTi alloys: issues and challenges”, Powder metallurgy and metal ceramics, Vol. 56, No. 9-10, pp. 599-609, 2017. Authors: Sharma, N., Kumar, K. and Kumar, V., SCI indexed | Other/Joint Author | |||
| Kamal Kumar | Mechanical Engineering | “Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy”, Particulate Science and Technology, an international journal, Vol. 35, No. 5, pp. 541-546, 2017. Authors: Sharma, N. , Raj, T. and Kumar, K., SCI indxed | ||||
| Kamal Kumar | Mechanical Engineering | “GA-based optimization using RSM in WEDM of Nimonic-90: a nickel-based super alloy”, International Journal of Industrial and System Engineering, Vol. 28, No. 1, pp. 53-69, 2018. Authors: Kumar, V., Kumar, K., Kumar, V. and Sharma, N. | ||||
| Kamal Kumar | Mechanical Engineering | “Experimental Study on Diametric Expansion and Taper Rate in EDM Drilling For High Aspect Ratio Micro Holes in High Strength Materials”, Materials Today: Proceedings, Vol. 5, No. 2, pp. 7363-7372, 2018. | ||||
| Kamal Kumar | Mechanical Engineering | “Wear characterization of biomedical porous alloy(Ni50-xTi50Cux) at elevated temperature”, Powder metallurgy and metal ceramics, Vol. 57, No. 3, 2018. Authors: Sharma, N. , Kumar, K, Saini, G. S. and Sharma, P., IF-0.511 | ||||
| Kamal Kumar | Mechanical Engineering | “Fabricatin of porous NiTi alloy using organic Binders”, Composites and Advanced Materials for Industrial Applications, Fabrication of Porous NiTi Alloy Using Organic Binders Composites and Advanced Materials for Industrial Applications, pp. 38-62, 2018. Authors: Kumar, K. and Davim, J.P. |