Home

Project-398-387015276

July 23, 2023

Project-398-1162828054

July 23, 2023

Book-Published-87-278001177

July 20, 2023

Book-Published-87-252424425

July 20, 2023

Membership-Information-505-731962749

July 20, 2023
PI Details Co-PI Details
Dr. Shilpi Chaudhary

Designation: Assistant Professor
Department: Physics
Email ID: shilpichaudhary@pec.edu.in

Funding Agency Project Cost
Science and Engineering Research Board, INDIA

Rs. 33,11,000
Amount received till date (in Rs.) 2,962,750

Start Date Completion Date Status
2020-12-31 2022-12-31 Completed
Abstract

The optimization of electron transport layers to improve the performance of the solar cell devices has been performed through simulations and experiments

The simulations were performed by using GPVDM package. The power conversion efficiency (PCE) can be ramped up by adjusting the active layer thickness, and optimum active layer thickness was found to 500 nm for formamidinium based PSCs. Five different types of electron transport is used and among all, SnO2 has been found as an efficient electron transport layer material to increase the PCE further. PCE of 24.41% has been obtained for formamidinium tin iodide- based PSC against 27.49% for formamidinium lead iodide - based PSC.

We have also simulated the comparison of organic and inorganic Sn-and Pb-based active layer thickness on photovoltaic parameters and it has been found that with the increase in thickness up to 600 nm, PCE and other photovoltaic parameters increase with maximum PCE of 24.68 %, 23.23 %, 19.22 %, and 17.51 % for MAPbI3, CsPbI3, MASnI3, and CsSnI3 PSCs, respectively. But with further increase in thickness results in more charge recombination, resulting in a decrease in PCE and photovoltaic parameters. Thus, for different architecture of PSCs used in this study, an optimum active layer thickness was found to be 600 nm. Experimentally, we have investigated the effect of doping and co-doping on optical, structural, and electrical properties of SnO2 nanoparticles using different microscopic and spectroscopic tools. The UV-Vis DRS spectroscopy results revealed that the optical band gap reduced from 2.90 eV for pristine SnO2 to 2.26 eV for co-doped 1 weight % Ni-Zn-SnO2 nanoparticles and can be tuned with a variation of weight % of Ni. Further, the photoluminescence emissions of all SnO2 nanoparticles in the range of 307 to 494 nm are related to oxygen vacancies or defects. The electrical conductivity studies confirm that the synthesized nanoparticles exhibit excellent ohmic contact behavior and show a notable increase in electrical conductivity for 1% Ni-doped Zn-SnO2 nanoparticles.

Manpower Sanctioned/Hired Manpower Trained

JRF (Nos): 1

Equipment Sanctioned/Procured
Name of Equipment Make & Model Year of Purchase Cost Salient Features of Equipment Condition (Working/ Not Working)
Glove box Vacuum
Technology
2023 22,79,557.04 Provides inert environment for material
fabrication
Working

 

Publications

Output/Outcome of the Project
PI Details Co-PI Details
Dr. Vasundhara Singh

Designation: Professor
Department: Applied Sciences
Email ID: Vasun7@gmail.co

Dr. Navneet Agnihotri

Designation: Professor
Department: Department of Biochemistry, Panjab University
Email ID: Agnihotri.navneet@gmail.com

Funding Agency Project Cost
Department of Science and Technology-Science and Engineering Research Board (DST-SERB)

Rs. 27,75,520

Start Date Completion Date Status
2017-07-05 2021-07-04 Completed
Abstract
  1. Enigmol, a known anti-cancer 1-deoxyshingolipid and its stereo isomers have been synthesized by a new route starting from the chiral pool using both isomers of L-alanine via Stereoselective Grignard reaction and Cross metathesis reaction as the key steps.
  2. The Enigmol analogues have been synthesized by varying chain lengths and an additional additional hydroxyl group on the C-4 position of Enigmol and its chain analogues. The key reaction involved the installation of different lipophilic chain lengths via stereoselective cross metathesis reaction followed by mCPBA epoxidation, Red-Al ring opening and deprotection for the chain analogues and OsO4/NMO mediated dihydroxylation for the 4-hydroxy substituted analogues on the earlier synthesized 1-deoxysphingosines.
  3. The butyrate ceramides of the 1-deoxysphingosines have been synthesized using the oleic acid and butyric acid, a known chemo-preventative agents via N-Acylation using p-nitrophenyl oleate and butyrate respectively.
  4. A library of peptidomimetic 1-deoxysphingosine ceramides by Multi Component UGI Reaction have been synthesized using different aldehydes, cyclohexyl isocyanide and butyric acid with the previously synthesized 1- deoxysphingosine
  5. The in-vitro biological evaluation has been done on the PC-3 and HCT-116 cell lines and the IC50 value have been calculated giving the encouraging results
Manpower Sanctioned/Hired Manpower Trained

JRF- One (1)

Ph.D Produced- One (1)

Equipment Sanctioned/Procured
Publications

Output/Outcome of the Project
PI Details Co-PI Details
Dr. Vasundhara Singh

Designation: Professor
Department: Applied Sciences
Email ID: Vasun7@gmail.com

Dr. Satwant Kaur Shahi

Designation: Principal
Department: ASBASJSM College Bela, Ropar
Email ID: shahi.satwant@yahoo.com

Funding Agency Project Cost
DRDO-TBRL

Rs. 22.34 Lakhs

Start Date Completion Date Status
2018-09-26 2021-10-15 Completed
Abstract

1) A new series of Energetic Ionic Liquid based salts were prepared with good oxygen balance based on urotropine, tetrazolium and triazolium.
2) A library of 3-amino-1,2,4-triazolium based salts by using aminotriazolone, nitrotriazolone, dinitrotriazolone and tetrazolone was synthesize.
3) EIL 3-amino-1,2,4-triazolium perchlorate was found to be highly sensitive towards impact and friction.
4) A new series of EIL/salts were prepared which exhibited good oxygen balance using 5-Aminotetrazolium perchlorate synthesized and showed excellent
5) A library of 1-H-2,3,4,5-tetraazolium based salts in combination with aminotriazolone, nitrotriazolone, dinitrotriazolone and tetrazolone was synthesized.
6) The impact and frictional sensitivity measurements was investigated at DRDO-TBRL and the as synthesized salts were found to be highly explosive in nature.

Manpower Sanctioned/Hired Manpower Trained

JRF- One (2)

Two (2)
Ph.D Produced- One (1)

Equipment Sanctioned/Procured

Sr. No.

Sanctioned List

Procured (Yes/No)

Model & make

Cost (Rs inlakhs)

Working (Yes/No)

Utilization Rate (%)

1.

IKA RET Magnetic Stirrer

 Yes

94,890.00

Yes

100

2.

Chiller with Vacuum Pump as accessory

Yes

2,07795

Yes

100

3.

Multifunction Printer Mf246Dn

Yes

24,799

Yes

100

4.

Melting point

Yes

24,072

Yes

100

5.

Fridge

Yes

12,499

Yes

100

6.

Microwave                                   

Yes

5,799

Yes

100

7.

Constant voltage transformer

Yes

15,340

Yes

100

Publications

Output/Outcome of the Project
Patent Filed/Granted under project
PI Details Co-PI Details
Dr. Kusum Harjai

Designation: Professor
Department: Microbiology
Email ID: kusumharjai1961@gmail.com

Dr. Sanjay Chhibber

Dr. Sanjay Chhibber
Designation: Professor
Department: Microbiology
Email ID: sanjaychhibber08@gmail.com

Dr. Vasundhara Singh
Designation: Professor
Department: Applied Sciences
Email ID: vasun7@yahoo.co.in

Funding Agency Project Cost
Department of Science and Technology- Science Engineering Research Board

Rs. 36,77,434
Amount Received till date (in Rs)- 34,77,434

Start Date Completion Date Status
2018-12-15 2021-12-15 Completed
Abstract

The conjugate was found to be QS inhibitor. It also showed potent in vitro inhibitory activity against biofilm formation due to reduction in twitching, swimming, and swarming motilities of P. aeruginosa. In silico molecular docking studies suggested that PZC 4 binds with the FptA, the outer membrane receptor of pyochelin indicating delivery of conjugate hence zingerone, inside the target organism. PZC possess therapeutic value as a ‘Trojan Horse’ entity and conjugate is transported inside the bacterium effectively through iron transport system after binding with siderophore receptor. PZC has been shown to have hepatoprotective potential in P. aeruginosa induced peritonitis mice model Therefore, this represents an innovative approach against multi-drug resistant Gram-negative bacterium P. aeruginosa. Hence, this study opens a path to employ PZC as potential drug candidate to suppress P. aeruginosa mediated infections. It can help in overcoming resistance.

Manpower Sanctioned/Hired Manpower Trained

JRF- 1

PhD produced- 1

Equipment Sanctioned/Procured

Name of Equipment

Make & Model

Year of Purchase

Cost

Salient features of Equipment

Condition

UV-Spectrophotometer

LabIndia

      2019

3,67,458

Spectrophotometer to observe the optical density

Working

  HPLC Columns

Sunfire C-18 RP

      2019

80,000

Columns of HPLC

Working

Publications

Output/Outcome of the Project
PI Details Co-PI Details
Dr Uma Batra

Designation: Professor
Department: Metallurgical & Materials Engg.
Email ID: umabatra@pec.edu.in

Funding Agency Project Cost
Ministry of Steel, GOI

189 Lakh

Start Date Completion Date Status
2019-12-06 Ongoing
Abstract

The project aimed to develop and optimize Austempered Ductile Iron (ADI) technology for use in the agricultural and automotive industries in India. The objectives included studying the mechanical properties of ADI, developing cost-effective production processes, and evaluating its potential applications in Agricultural and Automotive Industry in India.

Manpower Sanctioned/Hired Manpower Trained

JRF (Nos): 01

Ph.D Produced: 01(In progress)
M.Tech. Produced: 03
Technical Staff: 10

Equipment Sanctioned/Procured

Name of Equipment

Make & Model

Year of Purchase

Cost (Rs, in Lakh)

Salient Features of Equipment

Condition (Working /Not Working)

ADI Pilot Plant

HiTemp, Bangalore

2021

52.45851

200Kg Gross capacity

working

Servo Hydraulic Fatigue testing Machine of capacity 250 KN

HEICO, N. Delhi

2021

45,36,240

250 KN, 0.01-25Hz

working

Pin/Ball on disc wear friction monitor

Magnum, Bangalore

2021

5.6019

1-200N, up to 2000RPM

working

Publications

Output/Outcome of the Project
Patent Filed/Granted under project

Recent Research Activities

High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt
Suresh Chand
Influence of Flat Friction Stir Spot Welding Process Parameters on Quality Characteristics of AA6082Weld
Dr. Rajat Upadhyaya
Single sample face recognition using deep learning: a survey
Nitin Kumar
Synthesis, structural elucidation, and catalytic activity of bimetallic rhenium-tin complexes containing Schiff base ligand
Harminder Kaur
Correlation between the Mechanical and Tribological Properties of Rutile Reinforced LM27 Alloy Composite
Dr. Jagmohan Datt Sharma
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Flattening of free energy profile and enhancement of energy storage efficiency near morphotropic phase boundary in lead-free BZT-xBCT
Sanjeev Kumar
Recognition of Bovine Hemoglobin Protein on Molecularly Imprinted Polymer Surfaces using Nonlinear Vibrational Spectroscopy
Shilpi Chaudhary
Depression status identification using autoencoder neural network
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
Simulation of efficient Sn/Pb-based formamidinium perovskite solar cells with variation of electron transport layers
Shilpi Chaudhary
Sn coated Fe3O4 nanoparticles for selective and efficient oxidation of anthracene to anthraquinone
Harminder Kaur
Visualization and Assessment of Energy Efficiency Drivers and Solution Practices for Temperature-controlled Supply Chain Operations.
Mohit Tyagi
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
4-Hydroxy Enigmol, a 1-Deoxyphytosphingolipid that Exhibit Good Activity against Prostate and Colon Cancer
Vasundhara Singh
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
Technology and Education Inputs for Productivity Enhancement in Garment Manufacturing in the Developing World
Prof. Parveen Kalra
Fluorine-containing 2,3-diaryl quinolines as potent inhibitors of methicillin and vancomycin-resistant Staphylococcus aureus: Synthesis, antibacterial activity and molecular docking studies
Harminder Kaur
Metamaterial Absorbers for Microwave/THz applications
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Evaluation of corrosion resistance, mechanical integrity loss and biocompatibility of PCL/HA/TiO2 hybrid coated biodegradable ZM21 Mg alloy
Dr. Uma Batra
Exotic role of poling protocol on augmentation of magnetoelectricity in BCZT/CNZF layered composites
Sanjeev Kumar
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Multispectral transmission through phoxonic crystal slot-waveguide at midwave infrared frequencies
Jyoti Kedia, Neena Gupta
Health Risk Assessment of Gurdaspur, Punjab, India Using Field Experiments and GIS: A Groundwater Perspective
Dr. Har Amrit Singh Sandhu
SIFTBCS: scale invariant feature transform based fuzzy vault scheme in biometric cryptosystem
Nitin Kumar
Modelling of barriers encumbering the advancement of processing technologies towards lean manufacturing principles.
Mohit Tyagi
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
Visualization and analysis of key performance indicators for agricultural cold supply chain in Indian context using fuzzy DEMATEL approach.
Mohit Tyagi
Analyzing the thermal, economic, and environmental dynamics of phase change materials used in cold chain applications.
Mohit Tyagi
To Study Impact of Array Tilt Angle, Orientation, and Inverter arrangement on Power Output of Rooftop Solar PV Panels for Chandigarh.
Prof. Tarlochan Kaur (PI) , Dr. Poonam Saini (CO-PI)
Thiophenol amine-based Schiff base for colorimetric detection of Cu2+ and Hg2+ ions
Harminder Kaur
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar
Mathematical depiction of costing perspectives allied with the dynamics of processed food supply chain
Mohit Tyagi
Tribological behaviour of transparent ceramics: A review
Dr. Sandan Kumar Sharma
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Self-Switching Device (SSD) as Terahertz/Microwave detector
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Multispectral transmission through phoxonic crystal slot-waveguide at midwave infrared frequencies
Jyoti Kedia, Neena Gupta
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Synthesis and Characterization of CoCrFeNi1.75-xTi0.25+x High Entropy Alloy
Suresh Chand
Investigations of effect of hydroxyl-terminated polybutadiene-based polyurethane binders containing various curatives on thermal decomposition behaviour and kinetics of energetic composites
Vasundhara Singh
Modelling of barriers encumbering the advancement of processing technologies towards lean manufacturing principles.
Mohit Tyagi
Sustainable magnetically recoverable Iridium coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water
Harminder Kaur
RF MEMS SWITCH FOR HIGH FREQUENCY APPLICATION
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Time-dependent mechanistic insight into photo-degradation of mixed hydrophobic disperse dyes by magnetically separable nitrogen iron codoped titania under visible light using process variable optimization
Vasundhara Singh
Evaluation of school backpack prototype-based on gait parameters, energy expenditure and posture of students
Prof. Parveen Kalra
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation
Moolchand Sharma
Critical Behavior of Relaxor〖 Pb〗_0.91 La_0.09 (Zr_0.65 Ti_0.35 ) O_3: Interplay between Polar Nano Regions, Electrocaloric and Energy Storage Response
Sanjeev Kumar
Computational investigation of bioactive 2,3-diaryl quinolines using DFT method: FT- IR, NMR spectra, NBO, NLO, HOMO-LUMO transitions, and quantum-chemical properties
Harminder Kaur
Innovations in Electro Chemical Discharge Machining Process through Electrolyte Stirring and Tool Rotations
Dr. Chandrashekhar Jawalkar
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
A comparative analysis of solvent cast 3D printed carbonyl iron powder reinforced polycaprolactone polymeric stents for intravascular applications
Jasvinder Singh
Geospatial survey of sand mines pilot project in Haryana
Dr. Har Amrit Singh Sandhu
GaN HEMTs FOR HIGH FREQUENCY APPLICATIONS
Arun Kumar Singh, Sanjeev Kumar
Adaptive qXE-LMF Filter for Improving Power Quality Using Grid Supporting Photovoltaic System
Dr. Ajay Kumar
Assessing the Role of Virtual Surgical Planning in Mandibular Reconstruction With Free Fibula Osteocutaneous Graft
Prof. Parveen Kalra
Assessing the Role of Virtual Surgical Planning in Mandibular Reconstruction With Free Fibula Osteocutaneous Graft
Prof. Parveen Kalra
Electric Field Sensor for Electromagnetic Pulse Measurement
Prof. Neelam Rup Prakash
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Ballistic Rectifier for Thermoelectric and Terahertz Applications
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
Mathematical depiction of costing perspectives allied with the dynamics of processed food supply chain
Mohit Tyagi
IoT Based Accident Prevention, Detection and Alert System using GPS & Heat Mapping of Accident Prone Areas of Chandigarh
Dr. Sanjay Batish
Comparative analysis of radiation tolerant analog circuit layout in 180 nm CMOS technology for space application
Prof. Neelam Rup Prakash
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
Finite element analysis of dental implant surgical guides
Prof. Parveen Kalra
Bilayer Graphene/HgCdTe Heterojunction Based Novel GBn Infrared Detectors
Arun Kumar Singh , Neena Gupta, Sanjeev Kumar
Visualization and analysis of key performance indicators for agricultural cold supply chain in Indian context using fuzzy DEMATEL approach.
Mohit Tyagi
Surface Displacement Analysis of Road-Cut Slopes in the Vicinity of Koteshwar Area, Uttarakhand, India
Dr. Har Amrit Singh Sandhu
Structural, morphological, and opto-electrical properties of Y2-xYbxO3 nanoparticles synthesized using co-precipitation method
Dr. Jagmohan Datt Sharma
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Electrochemical Behavior of Aluminum-Molybdenum Surface Composites Developed by Friction Stir Processing
Dr. Mahesh V. P.
Changes in condylar position after orthognathic surgery and its correlation with temporomandibular symptoms (TMD)- a prospective study
Prof. Parveen Kalra
Novel Vanillin-based hybrids inhibit quorum sensing and silences phenotypical expressions in Pseudomonas aeruginosa
Vasundhara Singh
Depression status identification using autoencoder neural network
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
Characterization and Quasi-Static Compressive Response Of Closed Cell Al2024-B4Cp Composite Foams and Their Energy Absorption Characteristics
Dr. Jagmohan Datt Sharma
Audio-video emotional response mapping based upon Electrodermal Activity
Prof. Parveen Kalra, Prof. Neelam Rup Prakash
Dynamic, Hydraulic properties of spatially varied pond ash within an ash pond for Reclamation of abandoned/closed ash pond.
Dr S.K Singh
Improved Pd/Ru metal supported graphene oxide nano-catalysts for hydrodeoxygenation (HDO) of vanillyl alcohol, vanillin and lignin
Vasundhara Singh
3D Printable, injectable Amyloid-based composite Hydrogel of Bovine Serum Albumin-Aloe Vera for Rapid Diabetic Wound Healing
Shilpi Chaudhary
Stubble burn area estimation and its impact on ambient air quality of Patiala & Ludhiana district, Punjab, India
Dr. Har Amrit Singh Sandhu
Flash Spark Plasma Sintering of SiC: Impact of Additives
Dr. Sandan Kumar Sharma, Dr. Pavol Hvizdoš, Dr. Michael J. Reece, Dr. Salvatore Grasso E-mail addresses
BRIEFBCS: binary robust independent elementary features based fuzzy vault scheme in BCS
Nitin Kumar
Acidic ionic liquids: an alternative to HF for {001} reactive facet-controlled synthesis of anatase titania
Vasundhara Singh
L Style n-MOSFET Layout for Mitigating TID Effects
Prof. Neelam Rup Prakash
A comprehensive review of grid-connected solar photovoltaic system: Architecture, control, and ancillary services
Ajay Kumar
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
Progress in bioactive surface coatings on biodegradable Mg alloys: A critical review towards clinical translation
Dr. Uma Batra
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Long-Short Term Memory Auto-Encoder based Position Prediction Model for Fixed-wing UAV during Communication Failure
Poonam Saini
Flexible Ag@LiNbO3/PVDF Composite Film for Piezocatalytic Dye/Pharmaceutical Degradation and Bacterial Disinfection
Dr. Gurpreet Singh
Modulation of polar dynamics with oxygen vacancies in Zn doped BaZr0.1Ti0.9O3
Sanjeev Kumar
Self-biased characteristics of NZCF/BCZT layered magnetoelectric composites: A novel coupling paradigm in magnetoelectricity
Sanjeev Kumar
Analyzing the thermal, economic, and environmental dynamics of phase change materials used in cold chain applications.
Mohit Tyagi
Chemical engineering at morphotropic phase boundary: Interplay with thermally stabilized ultra-high energy storage and electrocaloric response
Sanjeev Kumar
Effect of polar nano region dynamics on pyroelectric energy conversion efficiency of doped BaTiO3
Sanjeev Kumar
Electromagnetic Pulse Sensor
Prof. Neelam Rup Prakash
Changes in condylar position after orthognathic surgery and its correlation with temporomandibular symptoms (TMD)- a prospective study
Prof. Parveen Kalra
Electrochemical detection of herbicide atrazine using porous MnO2-NiO nanocatalyst
Dr. Anu Prathap M. U.
An auto-tuned droop coefficient-based controller for microgrid system to enhance grid resilience during blackouts
Ajay Kumar

Agnipath Scheme